- SmartFactoryKL will exhibit expanded infrastructure functions at the Hannover Messe: Measurements moved from infrastructure box to edge devices
- Contactless charging of the flexible transport system
In the past, an infrastructure box supplied every two modules of the SmartFactoryKL production plant with all required media – electrical power, compressed air, industrial Ethernet. This year, for the first time, the partner consortium shows how a central box can take over the supply functions for a complete production line with up to four modules.
An additional simplification has been achieved in the area of data measurement: in the past data measurement and evaluation was done within the infrastructure boxes, whereas, this year a decentralized approach has been introduced. In this approach, edge devices are retrofitted as needed, on or in the individual modules, which supports the handling of the entire data management for the connected production modules. The edge device provides the data for the various services such as edge computing or data transfer to the cloud. Furthermore, the edge devices provide and make use of the administrative shells of the installed components within the manufacturing modules. In this way, the “intelligent” infrastructure moves closer to the production stations themselves.
Another Use Case: Contactless charging of flexible transport systems
In 2018, the flexible transport system (FTS) of the SmartFactoryKL Industrie 4.0 plant takes on additional, energy intensive functions, for example, optical quality assurance during product transport by means of 5G communication technologies. To accelerate the battery charging process and simplify the logistics, the FTS is recharged after reaching a docking station without any physical contact. The transfers between the production line and the transport system are used for the energy transmission process and ensure the long-term availability of the FTS.
Background: Advanced infrastructure boxes at the SmartFactoryKL Industrie 4.0 demonstrator
Just as a modern Industrie 4.0 plant is adapted by quickly changing to meet the new requirements of production, the same should also be valid for the infrastructure. The SmartFactoryKL partner consortium set the course right from the start: In 2014, already in the first generation of the SmartFactoryKL production plant, all supply media – electrical power, compressed air, industrial Ethernet – could be connected by a single HDC plug, also known as the "All-in-One-Plug-In." The use of infrastructure boxes is made for double scalability: on the one hand, as related to the production modules and on the other hand, as related to the supply media.
Developing diagnostics and a communication capable infrastructure
Additional functions were offered in the next phase of development. Included among these, for example, are metering and supplying power via OPC UA, switching electrical current on or off at all inputs and outputs from the main switch, and firewall functions for data communication.
In addition, the SmartFactoryKL partner consortium introduced additional added value by means of a new infrastructure box. Specifically, diagnostic and communication capabilities were added to the unit. Consumption data for the connected module is measured by flow sensors, electricity meters, and network load monitors at the unit. The infrastructure box also checks the supply performance in various ways: the topology of the connected infrastructure boxes can be determined based on the data from the networked devices. From this, a fault tree is derived in the event of supply anomalies. Also, the pneumatic valves and contactors for the on/off switches for the supply media are monitored.
The diagnostic and communication capabilities of the infrastructure boxes as well as the expanded stage of the new infrastructure distribution box can be seen in connection with the recently installed edge devices at the Hannover Messe 2018.
The partners involved in the Industrie 4.0 demonstrator at SmartFactoryKL are:
Belden/Hirschmann, Bosch Rexroth, B&R Automation, EPLAN Software & Service, Festo, HARTING, Huawei, IBM, KIST Europe, LAPP KABEL, METTLER TOLEDO, MiniTec, PHOENIX CONTACT, Pilz, proALPHA, SAP, Siemens, TÜV SÜD, and Weidmüller.
About the Technologie-Initiative SmartFactory KL e.V.
The SmartFactoryKL technology initiative was established as a non-profit organization in 2005, bringing together for the first time industrial and research partners in an Industrie 4.0 network to implement joint projects for the factories of the future. SmartFactoryKL is a unique, manufacturer-independent demonstrator and research vehicle located at the German Research Center for Artificial Intelligence (DFKI) in Kaiserslautern. Promising innovative Information and Communication Technologies (ICT) are evaluated and further developed in a realistic industrial production environment on site. Products and solutions as well as universal standards in the areas of Industrie 4.0 have already been developed at the technology initiative with the active participation of its members. Together with other regional competence suppliers, SmartFactoryKL was recognized by the German Federal Ministry for Economic Affairs and Energy (BMWi) and designated as SME 4.0 Competence Centrum Kaiserslautern:
www.smartfactory.de
Press contact:
Dr. Haike Frank
Head of Public Relations Department
Technologie-Initiative SmartFactory KL e.V.
Trippstadter Straße 122
D-67663 Kaiserslautern
Phone: 0631/20575-3406
e-mail: frank@smartfactory.de
Christian Heyer
DFKI Communications Department Kaiserslautern
Deutsches Forschungszentrum für Künstliche Intelligenz (DFKI) GmbH
Trippstadter Straße 122
D-67663 Kaiserslautern
e-mail: communications-kl@dfki.de
